A Full-Service Federal Acquisition System Company

Cote-L

Cote-L Industries is a woman owned small business that specializes in safety coatings. To learn more about their products, click on the links below.

DURABAK * CeaseFire

DURABAK Safety Coatings

DURABAK - M26™ and DURABAK 18 - M26™ are non slip coatings that have undergone extensive Navy testing and are now available on the Qualified Products Listing. DURABAK - M26™ is currently the only protective coating approved under Mil-Prf 32171A.

DURABAK is a tough, one-part, waterproof, polyurethane coating. It is made with self-contained recycled rubber granules that give them attractive, tough-textured finishes. Once exposed to atmospheric moisture, both the M26™ and the 18 - M26™ coatings undergo a chemical curing process, which changes them from a liquid to a tough polyurethane membrane. They have excellent abrasion and chemical resistance.

DURABAK - M26™ and DURABAK 18 - M26™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, metal, concrete, wood, berglass, rubber, and most painted surfaces.

DURABAK - M26™ (indoor applications) and DURABAK 18 - M26™ (outdoor applications) are applied by a special roller, brush, or spray. Each is available as a smooth, protective coating, as well.

DURABAK is available for application on:

♦ Ship Decks   ♦ Heavy Equipment

♦ Heads ♦ Truck Beds

♦ Galleys ♦ Loading Docks

♦ Ship Passageways ♦ Scaffolding

♦ Concrete Floors   ♦ Ramps

♦ Stairs ♦ Hangar Floors

♦ Gangways ♦ Workboats

♦ Walkways ♦ Bridges

♦ Line Striping ♦ Trailers

♦ Construction Plate ♦ Pipes

♦ Metal Structure ♦ Elevator Floors

♦ Wooden Floors   ♦ Catwalks

♦ Metal Tanks

For more information, please contact George Barros

CeaseFire™ Flame Preventative Fire Retardant Products

CeaseFire™ two part epoxy coatings are based on Cote-L's proprietary non-halogenated phosphate technology and form a continuous char foam that protects products from both heat and flame.

Characteristics:

foam char swells from 1 to 1.5 inches
activates at 300°C
provides efficient flame barrier
stops fire, spread of flame and smoke
ASTM E84 Flame Spread Test Rating = 5
ASTM E84 Smoke Density Test Rating = 5
Pittsburgh Protocol > 15 minutes
Intumescent powder can be added to many types of coatings and compounds
at 10 mils thick, certified by DNV and ABS after passing strict tests of IMO (International Marine Organization)
insoluble in water; will not leach out over time

CeaseFire™ may be used for general-use paint in shipboard, offshore, and high speed craft applications where compliance with IMO requirements for Smoke and Toxicity and Flammability is essential. CeaseFire™ meets the 1974 SOLAS (as amended) requirements for paints/finish materials as outlined in the Fire Test Procedures Code (IMO Resolution MSC.31(67)).

The following pictures demonstrate the effectiveness of CeaseFire™ on coated corrugated cardboard. Click on an image below to enlarge:

Once char has formed and the fire is out, the char can be scraped off the surface and the undamaged substrate can be refurbished.

For more information, please contact George Barros

• Land Systems • Naval Systems • Aerial Systems • Information Systems •

ADI Technologies, Inc.
1487 Chain Bridge Rd., Suite 204
McLean, VA 22101
P: 703-734-9626 F: 703-448-8591